Machine Videos

The Student Shop’s YouTube tutorials can help you prepare for Part One Safety Training.

Explore the Episodes

Basic Lathe Terminology
Setting Up the Lathe
A Close up View of Setting up the Lathe
Setting the RPM’s
Setting the Feed Rate
Saddle Controls
Setting up the DRO
Using the Tailstock
Close Up of Using the Tail Stock

These videos will help you understand how to set-up and use a milling machine.

#1 Setting Up the Endmill & Material
#2 Powering up and Homing out
Setting up the Manual Milling Machine
Using an Edge-finder on a Mill
Center Drilling, Drilling, & Countersinking on a Mill
Milling & Squaring up a part using a Mill
Milling a Slot in a Part
Milling an Angle on a Part

Using the Sheet Metal Shear
Using the Brake (Metal Bender)

 

TroTec Laser

Autocad Inventor and Mechanical, as well as Coral Draw 6 are already installed on the TroTec Laser computer.

If you use Solidworks for your design save it as a .dwg/.dxf file you will then be able to open it in AutoCad and print it out on the Laser.

Please note that ALL adhesive paper MUST be pulled off both sides of the acrylic sheet before placing it in the laser.

Manuals

Tutorials

  • The tutorial has a little more indepth instruction on how to use the laser.
  • They are a good starting point for the beginner user.
  • TroTec has videos that can help you understand how to use their laser.

TroTec’s laser manual for the Speedy 400

Funny outtake videos about the making of the real student shop videos. Some of it you will only find funny if you are a machinist. :~)

These videos are no longer needed for our Student Shop machines but they have good information about those machines.

Changing the Spindle Speed on the 8 Speed Bridgeport Mill 
Changing the Spindle Speed on the Variable Speed Bridgeport Mill
Changing the Spindle Speed on the 5 Speed Grizzly Mill